Forum

Ok then,

But I have a user control that contains a zoom functionality. I place the control in a StatusBarPane in the StatusbarControlsArea but at run time the control is not visible? You can try it! The user control is similar with the zoom control in the Internet Explorer located in the status bar.

The control consists on a toolbar with a single split button. the control and the toolbar back color is set to Transparent. In design time I can see the control but at run time the control is invisible. The StatusBarPane width has updated because of the width of my control.

If the picture is not visible then give me an email address to send it to you!

Best regards!

Hi there!

Is there a solution to add a custom control to the status bar? or a zoom control is implemented in the .NET distribution that I can position on a status bar?

Yes, you can add a custom control to the status bar. The StatusBar control can have two containers inside: StatusBarNotificationsArea, which is located on the left, and StatusBarControlsArea, on the right. Each of these two containers can have multiple StatusBarPane controls inside. StatusBarPane is used for groupping related user controls and it is the only way to put them inside the status bar. You can add custom controls to the status bar just as standard ones. For more detailes on how to use the StatusBar control, please look at the ’Status Bar’ page in the Controls Sample.

and last thing:

please provide a property to get rid of (MDI) ChildForm’s ControlBox. I have a IE-like TabbedMdi and cannot allow users to e.g. minimize child form.

I disabled all Min/Max/Close buttons, but I think it would be elegant :) to remove those three completely.

Best regards,

Przemyslaw Luniewski

Hi again,

try running ’Ribbon UI Sample’ and right click on form’s title bar, where title text is...

I get the same everytime in my test solution.

OS: Vista business aero enabled, VS2008Pro

Hi,

first of all, Elegant Ribbon is a fine control :)

But I had Vista aero disabled, and to my surprise I noticed painting problems, regarding borders I think.

Maybe this is the nag dialog I am getting, or anything else.

see: [URL=http://img219.imageshack.us/my.php?image=elegantribbonpaint.jpg][IMG]http://img219.imageshack.us/img219/9224/elegantribbonpaint.th.jpg[/IMG][/URL]

when I turn aero on, problem disappears. when tried this ’demo project’ on WinXP I did not notice any problems. when I run demo project (shipped with trial) I notice no problems... until I change something to the project, then it starts to mess painting. fullscreen is okay. i am using VS2008Pro on VistaBusiness hp laptop.

Yes, I’d like to test 3.2 beta, please.  I am now testing if I will be able to deploy Elegant Ribbon at affordable time-cost in my recent project before initial submission.

About the slow-site: what can I say, in Firefox 2.0 loads gracefully like it should. The IE8 does the background like a sea wave comming in... row by row, from the top of view. Menus take forever to show up, pages load like using dial-up connection.

I have Silverlight 2.0 installed, if that makes any difference. I supposed it had something to do with IP I was comming from, but now different IP and I have to use Firefox 2.0 to write this post.

And about MDI child controlBox - any chance to expose some property to hide those three small buttons ?

Regards,

P.L.

Thank you for your feedback. Could you be more specific about the slowness? We tested the site with IE8 and found no problem.

Thank you for reporting the bug. It is already fixed. We can provide you with a bug free version immediately on your request.

Basically all im trying to do is create a simple window and fill it with some components, but im getting weird errors when all im trying to do is construct my lables and buttons...

so i delcared my first lable,

 private Elegant.Ui.Label label37;

then in my constructor method i am trying to construct it like this.

this.label37 = new Elegant.Ui.Label();

but strangly enough im getting this weird error

’System.TypeInitializationException’ occurred in Elegant.Ui.Common.dll 

The type initializer for ’Elegant.Ui.Control’ threw an exception.

i honestly dont understand what is going wrong....

Hi,

You need to add References to the following too. I had the same problem and it resolved by doing this.

Elegant.Ui.Common.Theme.XXX, Elegant.Ui.Ribbon.Theme.XXX

Petros

It looks like the component cannot find an assembly with a theme. Make sure that all needed Elegant.Ui.Common.Theme.XXX and Elegant.Ui.Ribbon.Theme.XXX assemblies are installed to the GAC or available in the application directory. If you still have the problem, please, send us a detailed description about the type of exception and error message(any inner exception is also important).

Hi,

I downloaded a trial version of the Elegant Ribbon menu. I did a test deployment of my VS2008 sample application (created using the vb.net setup wizard) to another machine and it crashed everytime. I tried it with 3 different machines. However if I remove the Ribbon menu, theapplication works when deployed to another machine.  We’d like to purchase this but we have to make sure first that it deploys with no problem. Please help.

Bryan

In your recent post you mentioned that you’d included the Elegant.Ui.Common.dll and Elegant.Ui.Ribbon.dll assemblies in the setup. But it is not enough. The ribbon control always use one of the following themes: Office2007Blue(default), Office2007Back, Office2007Silver or System. This means that you must supply at least one group of resource assemblies with your installation(for instance, Elegant.Ui.Common.Theme.Office2007Blue.dll and Elegant.Ui.Ribbon.Theme.Office2007Blue.dll if you use only Blue theme). You can find them all in the Elegant Ui installation folder. If you have any further questions with this, do not hesitate to contact us.

Hi Bryan

Well clearly there is something in the ribbon installation that is not in your application installation.  I apologise for my stoopidity but I cant determine what this mysterious missing component is.. hint..  it will be something layed down by the elegant ribbon installation ;/

wtf is with this forum anyway?  is there nobody else using this component that can add to this thread in a more convincing way and/or answer my question below?

Michael

Thank you for your interest Elegant Ribbon. Could you provide us with more detailes (the exception message, a screen shot, call stack) so we could help you out. Besides please make sure that you included theme assemblies in the deployment package(Elegant.Ui.Common.Theme.XXX.dll, Elegant.Ui.Ribbon.Theme.XXX.dll) for all the themes that you are using.

Check this link

http://www.prof-uis.com/elegant-ribbon/tech-support/faq/visual-themes.aspx#after-upgrading-to-v31-i-am-getting-a-warning-this-method-loads-themes-for-all-existing-components-what-causes-this-warning

Hi Bryan

Firstly, does the Setup Crash or the deployed application?

Assuming it is the latter,perhaps you are not including all of the requisite DLL’s in your setup package.  I am only a new user also but I do know that if you use the FormFrameSkinner and visual themes, each of the themes is compiled into dll’s.  you may need to include these manually in the Setup.

Michael

The Setup has included the Elegant.Ui.Common.dll and Elegant.Ui.Ribbon.dll. I use FormFrameSkinner but no visual themes.

Bert

Hi Guys

I am having a paint issue when using standard windows buttons inside a Ribbon Group. 

Steps to reproduce:

- add several standard (non Elegant) buttons to a Ribbon Group

- run the app (buttons display on ribbon group..all good)

- resize the form (smaller) so that the ribbon group collapses to its small form (no buttons on the small form box..all good)

- click the ribbon group small form dropdown thingy to get the dropdown view of the ribbon group (shows all buttons in dropdown. view, none on small form thingy.. all good)

-click the group again, click off or click another ribbon group so that the dropdown view thingy rolls up.. (the buttons are painted all bunched up on the small form thingy ..doh! looks nasty!)

I am using  - Elegant Ribbon 3.1 - Visual Studio 2008 (SP1) - .net 3.5 sp1

I need to use standard buttons rather than Elegant UI buttons because I have created custom buttons by heavily extending System.Windows.Forms.Button. Note though, this can be reproduced with completely standard button controls.

Hope we can sort this out.  I’m really happy with the Ribbon so far, my GUI is looking fantastic and I dont want to change components now

Michael Dausmann

www.RuleClarity.com

Hi.

How do I set shortcut key to directly access the control placed on the ribbon?

ex) ctrl + X,ctrl + Y

Dear Support,

It seems CheckedChanged event of RadioButton does not get fired in your library. In your ControlsSample I tried to add an event handler to this event but it never got called. When trying the very same with general Windows Forms Common control radiobutton, it works as expected. I’m using version 3.1. Could you please look into this?

Thank you,

Chris

After adding "Separator with Text" items in Application Menu and saving/reloading my project these items disappear and turn to the usual "Separator".

How I can use resource DLL (Elegant.Ui.Common.resources.dll, Elegant.Ui.Ribbon.resources.dll) for localize Ribbon UI? Thanks.

Please find the following assemblies with the Russian resources. These you should put in the ru-RU folder of you application directory. It should work.


http://www.prof-uis.com/download/tmp/ru-RU.zip

It’s work... "Customize Quick Access Toolbar" MENU is russian now.

But "Customize Quick Access Toolbar" DIALOG... It’s english still as before :(

Can you help me?

The dialog in question did not support localization in v.3.1 but we added this support now. The new version is coming soon. If you need the feature right away, please request the update by email.

There are a number of articles on the Internet on satellite assemblies and localization (for instance, http://msdn.microsoft.com/en-us/magazine/cc163609.aspx). Find a working example of localization resources below. Do not hesitate to contact us if you have any question.

http://www.prof-uis.com/download/forums/elegant-ribbon/string-resources.zip

I just upgraded an application that was using Elegant Ribbon 2.2 to the 3.1 version and I have the correct new key in place.  It works fine in Visual Studio 2008 (Visual Basic .Net) but when someone installs the deployment set they get an immediate crash saying "the type initializer for ’Elegant Ribbon’ threw an exception".   If you can advise me how to get around this I’d appreciate it.  I’m running Vista Ultimate. 

Is it possible to tell the ribbon which controls and/or ribbongroups to resize first when the form is being resized?  For example, if I have three ribbongroups and I shrink the form width, controls inside the first ribbongroup start resizing first.  I would like the third ribbongroup to resize first.

Thanks

I have a question regarding ribbon group informativeness. How can I indicate the order to change the informativeness level of the buttons inside a group. For example I want to collapse first the right most ones in the group. Is it possible?

Or is it possible to define different variants of the group layout like the ones in the Microsoft guidelines paragraph "DEFINING GROUPS FOR RIBBON RESIZING". There it say that I can define/select some group collapse stages. Is this possible?

Best regards,

Dexter

Unfortunately this feature is not supported. We understand that it may be reasonable in some cases to tune up in which order controls inside a particular group is collapsed. We will consider to add it in one of the next releases. Thank you for your suggestion.

OK - thanks.

Hi.

I want to make control toolbox like the visual studio toolbox by using the gallery on ribbon,
so I would like to be able to drag and drop from the gallery.

The gallery is posting MouseDown event on the Windows Form when I drag and drop,
but it not posting MouseDown event on the ribbon.

Thanks.
I can get mouse notifications.

Given the code below, if Form2 has an Elegant.Ui.TextBox the TextBox will fail to fire the TextChanged event after the instance of Form2 has closed the first time.

public partial class Form1 : Form

{

    Form2 frm = new Form2();

   

    public Form1()

    {

        InitializeComponent();

    }

Actually I would very much like the fix now.  It’s causing us a bit of heartache and we are going to have to change architecture of a bunch of screens to destroy and re-create windows if we don’t get it.  What do I need to do to get the fix?

Thank you for the bug report. The fix will be available in the next release. We can also send you a bug fix later this week (on your request).

Actually I would very much like the fix now.  It’s causing us a bit of heartache and we are going to have to change architecture of a bunch of screens to destroy and re-create windows if we don’t get it.  What do I need to do to get the fix?

Hi,

I’m testing my application on Vista/Server 2008 platform. It seems that the Ribbon does not work properly when Aero is enabled.
When adding a ribbon to the form, the title bar of the form disappears (as it should) and instead, the ribbon takes its place. In design time, everything looks fine. When running the application (again, with Aero enabled) the title bar of the form appears and the text of contextual tabs partially disappears or presented in the wrong location.

Thanks,
Roy

Hi,

Yes, it also occurs when using your Ribbon UI Sample under the Aero theme settings.

Thanks,
Roy.

Hi Roy,

Thank you for your report. The problem is that we failed to reproduce it on our Vista x64. Once Elegant Ribbon is installed, you can run the sample from "C:\Program Files (x86)\FOSS Software Inc\Elegant Ribbon\Samples\RibbonUISample\CS\bin\Release\RibbonUISample.exe" and see that it looks ok when the Aero is on (see the screeshot below). Could you help us reproduce it in some way?

Hi,

It seems like the problem was with the installation of the workstation.

After a clean installation everything worked properly.

Thanks for the help,

Roy.

I have added a ToggleButton to a Gallery. When I disable the ToggleButton, it always displays the check, even when .Pressed=false.

Hi,

When using VS2008, in design time, the ribbon object is displayed partially in BLACK.

BTW - any news on the coming release?

Thanks,
Roy

Where should I send it to?

The next release is planned for the end of May. Could you please send us a screenshot of the corrupted ribbon?

Where should I send it to?

I have an MDI application and I use subs to be able to show a relevant form by its name; however, I am attempting to add the license key to the application and I am not able to successfully do it.

The way I call a form is as follows (in a module):