Professional UI Solutions
Site Map   /  Register


Please Log In to post a new message or reply to an existing one. If you are not registered, please register.

NOTE: Some forums may be read-only if you are not currently subscribed to our technical support services.

Forums » Prof-UIS Tech Support » About CExtPrint ( It was settled by oneself. ) Collapse All
Subject Author Date
tera t Jun 12, 2007 - 12:25 AM


I incorporate GDIPLUS in one’s application.
Using MetaFile in GDIPLUS and,
I acquire made pixel size.
A figure of print was made in a range.

Metafile *pmetafile5;
pmetafile5 = new Metafile(
L"\\test.emf" ,


Technical Support Jun 12, 2007 - 4:16 AM

We have just improved the coordinate system translation code for printing and print preview. Please download the updated samples.

tera t Jun 12, 2007 - 8:18 PM


After all a sample does not work well.
When there is malfunction in CreateEnhMetaFile, it is thought.

I cannot make metafile in an appointed pixel
I have to appoint mm by this order.
However, I cannot acquire an accurate pixel number

GdiPlus can seem to satisfy these businesses.


Technical Support Jun 13, 2007 - 1:03 PM

The document content was correctly scaled after last improvements in the printing and print preview. Could you send us some screenshots demonstrating what you saw on your computer? Unfortunately we cannot use GDI plus because we provide compatibility with old Windows versions.

tera t Jun 14, 2007 - 2:17 AM


>Could you send us some screenshots demonstrating what you saw on your computer?


First of all.
I did problem solving.


Technical Support Jun 14, 2007 - 4:09 AM

Unfortunately, the link is broken. But, if you say that the problem is solved, then there may be no need for this screenshot.

tera t Jun 14, 2007 - 6:03 PM

I uploaded it again.

Technical Support Jun 15, 2007 - 7:38 AM

Please let us know which printer was used for the print preview demonstrated in this screenshot?

tera t Jun 18, 2007 - 3:13 AM


It is not caused by printer driver.
250/350/400 FX DC ART4 E

You make a metafile in designated mm.
The number of the pixels which you calculated in designated mm and program is different.

This is prime cause.
This is regarded as malfunction of CreateEnhMetaFile.

Technical Support Jun 20, 2007 - 10:24 AM

We have continued trying to re-compute coordinate mapping inside the printing and print preview subsystem. Here is the latest result:

Please try it.

tera t Jun 20, 2007 - 7:13 PM


A sample does not work well.
VE-304-M disappears.