Forum

In a MDI application (Prof-UIS 2.60 full) with two different document templates (type 1 and type 2) with their own menus and accelerator tables I’ve got the following problem:

If I load first document of type 1 and later the document of type 2 when I switch between document types the accelerators table of document of type 1 is lost, that means that the menu has been changed properly but the accelerators.
If I load first document of type 2 and later the document of type 1 when I switch between
documents types the accelerators table of document of type 1 works perfectly. Furthermore during switching operations between documents accelerators of document type 2 they continue working. I would appreciate any help. Thanks

We have tried to connect to the ftp your provided several times but failed. The error is:

Windows Socket Error:
The connection has been dropped because of a network failure or because the system on the other end went down without notice

Could you check this?

If you are using a simple non-customizable menu bar, menus and toolbars, the accelerator table is switched by MFC. If you are using customizable toolbars and menus, the accelerator tables are completely managed by Prof-UIS. Could you provide us with a test application which demonstrates the problem?

I made available the project into my ftp area as specified in the email I already sent you to technical support.