Professional UI Solutions
Site Map   /  Register
 
 

Forum

Please Log In to post a new message or reply to an existing one. If you are not registered, please register.

NOTE: Some forums may be read-only if you are not currently subscribed to our technical support services.

Forums » Prof-UIS General Discussion » How to Canon Driver Installation? Collapse All
Subject Author Date
Canon Printer Aug 25, 2021 - 12:50 AM

Follow these steps to install additional Canon drivers or software for your printer/scanner.
1. Go to Canon Support.
2. Enter your Canon model box. When appearing at the bottom of your model box, click it.
3. Select the driver and download the right image of your model.
4. If you want to download the driver, based on select software or firmware tab. The software has been in the example below.
5. Select the right side of the software or driver file button that you want to download. Select the button then closes the button.
6. Note your software list may vary from the examples you’ve seen here.
7. File Select Download to save on your computer.

https://ijstartcanonx.com/ij-start-canon-ts9120/
https://ijstartcanonx.com/canon-ij-setup-download/
https://ijstartcanonx.com/what-is-canon-ij-network-tool/
https://ijstartcanonx.com/canon-printer-drivers/
https://ijstartcanonx.com/canon-inkjet-printer/
https://ijstartcanonx.com/canon-printer-driver-download/
https://ijstartcanonx.com/canon-printer-not-scanning-problem-troubleshooting-guide/
https://ijstartcanonx.com/pixma-canon-mg3620-review/
https://ijstartcanonx.com/canon-b200-error/
https://ijstartcanonx.com/canon-mx490-printer-setup/
https://ijstartcanonx.com/canon-mx492-wireless-setup/
https://ijstartcanonx.com/canon-pixma-pro-100-install/
https://ijstartcanonx.com/download-canon-pixma-g3000/
https://ijstartcanonx.com/installation-of-canon-pixma-mx922-wps-button/
https://ijstartcanonx.com/canon-pixma-tr8550-printer/
https://ijstartcanonx.com/canon-cartridge-pixma-ts-3122/
https://ijstartcanonx.com/canon-pixma-mg2522-setup/
https://ijstartcanonx.com/install-canon-printer-pixma-e410/
https://ijstartcanonx.com/installation-of-the-canon-pixma-mg3022/
https://ijstartcanonx.com/install-canon-pixma-e560/
https://ijstartcanonx.com/how-to-use-google-cloud-print/
https://ijstartcanonx.com/print-from-chromebook-to-canon-printer/
https://ijstartcanonx.com/canon-pixma-mp495-error-codes/
https://ijstartcanonx.com/how-to-fix-canon-printer-error-6000/
https://ijstartcanonx.com/how-to-fix-canon-printer-ink-error/
https://ijstartcanonx.com/how-to-setup-canon-470-printer/
https://ijstartcanonx.com/how-to-repair-canon-mx922-printhead-error/
https://ijstartcanonx.com/canon-printer-connect-with-wifi/
https://ijstartcanonx.com/failed-to-acquire-information-on-the-driver-and-software/
https://ijstartcanonx.com/printer-error-pixma-mg-mp-mx-series/
https://ijstartcanonx.com/how-to-configure-canon-mx490-manual/
https://ijstartcanonx.com/how-to-set-up-your-printer-with-google-cloud-print/

Peter Groft Mar 17, 2023 - 3:26 AM

Downloading the Printer Driver
1. Go to Canon Download Centre and search for your model number.
2. Choose the recommended driver. If in doubt see – Choosing the right Canon Driver
3. Accept the Disclaimer that appears.
4. The file should begin downloading and you will be presented with information on finding the downloaded file.

Installing the Printer Driver
1. Launch the downloaded file to extract the folder to your downloads library. The folder will be named similarly to PCL6_Driver_V2185_32_64_EN_00. If you are on an older 32-bit version of Windows (XP) then open the 32BIT folder. If you have a newer 64-bit version of windows then open the x64 folder.
2. Run the Setup.exe file and accept any warnings that appear. Click the Yes button to accept the License agreement.
3. Select the Standard install checkbox and click the Next button.
4. Tick the checkbox on the printer you wish to install. Tick Set Printer Information and click the Next button.
5. Tick the Set as Default Checkbox and click the Next button.
6. Click the Start button to begin the installation.
7. Click Exit to finish the install. Placing a tick in ‘Restart My Computer’ ensures proper integration of the driver with your PC, but you can restart your computer when convenient.

Greetings,
Peter